Here, you are looking at the Driven Media Rear Bumper Reflector Overlay for the 2022+ WRX!

OEM 22+ Subaru WRXs come with rear bumper reflectors that stick out next to the matte black of the bumper. These overlays allow you to mask that reflector giving the rear of your car a much more clean and sleek appearance while still allowing the light to shine through so that the reflector works as intended.

These overlays are designed and cut in-house using high-quality vinyl to ensure proper fit and finish.

Color Options

• Dark Smoke - Completely blacks out the reflector while still allowing light to shine through so the reflector works as intended.

• Light Smoke - Gives the reflector more of a dark cherry red instead of a vibrant red appearance.

• Dark Stealth - Similar to the Dark Smoke but has a matte finish to it to blend in more with the black plastic of the fender.

Installation Instructions: (Dry Application)

• Note: The front of the overlays is indicated by the location of the “L” and “R” so make sure to pay attention to the orientation.

• Prior to applying the overlay, make sure the surface is thoroughly cleaned and dry.

• Carefully peel the overlay off of the backing and use the bottom edge of the headlight to line it up to cover the orange sidemarker. There is a line in the lens of the headlight that is approximately 1/4” away from the edge that you can use as a guide.

• Once you have successfully positioned the overlay where you want it, use a vinyl squeegee or microfiber to remove any air bubbles.

• We recommend allowing at least 48hrs before washing the car to allow for the adhesive to cure and avoid directly spraying them with a pressure washer.

• The temperature needs to be a minimum of 65°F for proper application.